News

18/02/2015

servo motor

servo motor A servomotor is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors.

Standart Posts 0 Comment
19/01/2015

linear motor

linear motor is an electric motor that has had its stator and rotor “unrolled” so that instead of producing a torque (rotation) it produces a linear force along its length. However, linear motors are not necessarily straight. Characteristically, a linear motor’s active section has ends, whereas more conventional motors are arranged as a continuous loop.

Standart Posts 0 Comment
18/01/2015

tubular electric Linear Actuator 12/24V dc motor

12/24V dc motor ,tubular mini electric Linear Actuator Parameter: Load:100-6000N Speed:3.5-55mm/s Stroke:0-400mm IP67,IP67M Hall Sensor,Over current protection,Limit switch tubular mini electric Linear Actuator Main features: . Normal Tempeture range:-5°C to 40°C . Duty cycle: Max. 10% or 2 minutes in use followed by 18 min.Rest . Very small dimensions and elegant design . High efficiency DC permanent magnet industrial motor 12V/24V with planetary gear . IP54 &  IP66 protection class , Waterproof and dust-proof . Over current circuit protection . Hall sensors for precision control and positioning . No load noise: 50dB .Certified:CE . Diameter 52mm actuator’s material is aluminum Technical parameters    Max.Load(N)       […]

Standart Posts 0 Comment
16/01/2015

Brushed DC electric motor

Brushed DC electric motor A stepper motor or step motor or stepping motor is a brushless DC electric motor that divides a full rotation into a number of equal steps. The motor’s position can then be commanded to move and hold at one of these steps without any feedback sensor (an open-loop controller), as long […]

Standart Posts 0 Comment
15/01/2015

brushed DC motor

brushed DC motor is an internally commutated electric motor designed to be run from a direct current power source. Brushed motors were the first commercially important application of electric power to driving mechanical energy, and DC distribution systems were used for more than 100 years to operate motors in commercial and industrial buildings. Brushed DC […]

Standart Posts 0 Comment
12/01/2015

DC Gear Motors Reduction

A transmission is a machine in a power transmission system, which provides controlled application of the power. Often the term transmission refers simply to the gearbox that uses gears and gear trains to provide speed and torque conversions from a rotating power source to another device. the term transmission refers to the whole drivetrain, including […]

Standart Posts 0 Comment
  • 1
  • 2